PHP cho phép các nhà phát triển khai báo các phương thức xây dựng cho các lớp. Các lớp có phương thức xây dựng gọi phương thức này trên mỗi đối tượng mới được tạo, do đó, nó phù hợp với bất kỳ khởi động nào mà đối tượng có thể cần trước khi nó được sử dụng
Lưu ý. Các hàm tạo cha mẹ không được gọi là tạm dừng nếu lớp con định nghĩa một hàm tạo. Để chạy một hàm tạo cha mẹ, một cuộc gọi đến cha mẹ. __construct[] in the function create cons là bắt buộc. Nếu trẻ không định nghĩa một hàm tạo thì nó có thể được kế thừa từ lớp cha giống như một phương thức lớp bình thường [nếu nó không được tuyên bố là riêng tư]. Các hàm tạo cha không được gọi ngầm nếu lớp con định nghĩa một hàm tạo. Để chạy hàm tạo cha, hãy gọi tới parent. __construct[] trong hàm tạo con là bắt buộc. Nếu con không định nghĩa hàm tạo thì nó có thể được kế thừa từ lớp cha giống như một phương thức của lớp bình thường [nếu nó không được khai báo là riêng tư].
Ví dụ số 1 người xây dựng trong kế thừa
2
Domger tại Freenet Dot de ¶ ¶
5 năm trước
class
2
class
class
43class
2
class
class
44class
2
class
class
45class
2
class
class
46____22IWWP tại Outlook Dot Com ¶ ¶
2 năm trước
class
2
class
class
48class
2
class
class
492
prieler tại ABM Dot tại ¶ ¶
15 năm trước
public function
6
public function
7
public function
8
public function
9Yousef Ismaeil cliprz [at] gmail [dot] com ¶ ¶
9 năm trước
__construct[int $x, int $y = 0] {
0
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
1
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
2Mỗi Người ¶ ¶
10 năm trước
__construct[int $x, int $y = 0] {
3
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
4
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
5
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
6Jonathon Hibbard ¶ ¶
12 năm trước
__construct[int $x, int $y = 0] {
7
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
8
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
9
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
E_DEPRECATED
0Bolshun tại Mail Dot Ru ¶ ¶
14 năm trước
E_DEPRECATED
1
David tại Synatree Dot Com ¶ ¶
14 năm trước
E_DEPRECATED
2
E_DEPRECATED
3
E_DEPRECATED
4
E_DEPRECATED
5
E_DEPRECATED
6
E_DEPRECATED
7
__construct[int $x, int $y = 0] {
1
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
E_DEPRECATED
9
...$values
00
...$values
01
...$values
02
...$values
03
SubClass extends BaseClass {
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}class
OtherSubClass extends BaseClass {
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
2David tại Synatree Dot Com ¶ ¶
ngoằn ngoèo khi bắt đầu chấm bụi ¶
...$values
05
...$values
06
...$values
07
...$values
08
SubClass extends BaseClass {
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}class
OtherSubClass extends BaseClass {
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
21 tháng trước ¶
Reza Mahjourian ¶
...$values
10
...$values
11
...$values
12
...$values
13
...$values
1416 năm trước ¶
instatiendaweb tại gmail dot com ¶
...$values
15
...$values
16
...$values
17
...$values
18
...$values
19