I tried 'database update' and then create the rte table. I did not receive any error but when I checked rte file additional parameters can be found in lines [line 26-30, see attached picture].
I think the problem is not fixed, and I would greatly appreciate it if users can provide me with suggestions.
Thank you!
Natalja C.
unread,
Jan 18, 2021, 2:21:49 AM1/18/21
to SWAT-user
Hello,
Could you show where exactly you are getting this error. I think you are talking about ArcSWAT interface and not swat.
Best,
Natalja
kindl...@gmail.com
unread,
Jan 18, 2021, 4:16:19 PM1/18/21
to SWAT-user
Hi Natalja,
Yes, this is about the ArcSWAT interface, and I am sorry if this is not the right place to post. I was following the thread to see if the original author or others could solve this error.
I am trying to set up a SWAT model using ArcGIS 10.5 and ArcSWAT 2012.10.5.24.
I have successfully set up several SWAT models in the past using ArcGIS 10.3 and ArcSWAT2012.10.3.19., and this is the first time I encountered this error.
First, I received this error [column "prf" does not belong to table .:rte file print error on Subbasin: 1] when I tried to 'Write SWAT input tables.'
Then, I tried 'database update' and then recreated the rte table [The approach I tried above was a suggestion I found on the ArcSWAT forum.]
Then, when I checked created *.rte files, four additional parameters can be found in lines [line 26-30, see attached picture].
After that, I was able to run the simulation without any issue, but I was wondering whether those additional parameters are supposed to be in the rte file or not.
I said those four parameters were additional because when I used arcswat 2012.10.3.19 those four parameters were not in the SWAT2012.mdb file and were not written in the *.rte files.
I checked the SWAT2012.mdb stored in the ArcSWAT Databases folder [D:\SWAT\ArcSWAT\Databases; I installed ArcSWAT2012.10.5.24 on my D drive], and I found that below 'CH_EQN' there were 16 additional parameters in the 'rterng' tab.
I guess that additional parameters were written in the *.rte file because they were in the arcswat 2012.10.5.24's SWAT2012.mdb.
I checked the SWAT release note and I did not find any description about adding parameters in rte tab or file, so I am wondering whether I installed arcswat correctly or not.
I would appreciate it if you can provide me with any suggestions or comments as to how to solve this error.
Thank you.
Vincent
SWAT2012.mdb_2012.10.5.24.jpg
SWAT2012.mdb_2012.10.3.19.jpg
Setareh Amini
unread,
Feb 17, 2022, 1:39:48 PM2/17/22
to SWAT-user
Dear Mr. Khalili,
Did you solve this problem? I have faced the same error and it would be my pleasure to guide me.
Thanks
Setareh Amini
jorge.rd...@gmail.com
unread,
Dec 24, 2022, 10:31:13 AM12/24/22
to SWAT-user
Hi everybody how are you?
I have the same problem, someone was able to solve it, if you could guide me on how to solve it?
My SWAT worked very well on its own, I formatted my PC because it needed maintenance and I installed the same operating system [Windows 10], the same version of ArcMap [10.6] and its corresponding version, and run SWAT, with any project, in different zones gives me the same error and I don't know what it is due to if I did the installation correctly.
Greetings.
Ms. GIS
unread,
Jan 1, 2023, 5:04:08 AM1/1/23
to SWAT-user
don't use an old swat2012 database. The problem was able to solve it.
Smriti Shrestha
unread,
Apr 14, 2023, 12:30:09 PM4/14/23
to SWAT-user
Hi everybody how are you?
I have the same problem, if someone was able to solve it, could you please guide me on how to solve it?
"Unhandled exception has occurred in a component in your application. If you click continue, the application will ignore this error and attempt to continue. Column 'CO2_X2' does not belong to table tblBSN"
If I click "continue" it directs me to the interface where I can edit the .bsn file, but I am not able to save any of the edits. I see that a user posted to the Arc-SWAT user group with this same question a few years ago, but there was no answer to their post.
Xiao Zhang
unread,
Jul 2, 2021, 1:06:30 PM7/2/21
to ArcSWAT
I don't know the reason why this happens. You can edit the file in TxtInout folder manually but be careful!
Shuvra Bijukshe
unread,
Feb 3, 2022, 11:28:55 AM2/3/22
to ArcSWAT
Hello,
Please
Go to "Write Input Tables" then "Database Update" then select "bsn" and just click "update database".