How do I fix windows has stopped this device code 43 Nvidia?

At the beginning we thought was a problem of our PC with installed previously a ASUS GTX 1050 Ti and now a Zotac GTX 1070 Ti but we figure out very soon that this afflict all the RTX and GTX Nvidia cards from 2015 till now also for the Laptops.

The problem persist with the new generation cards from 2019 like GTX & RTX 2060 and 2080 we found several topics about it. Today we will tell you all the solution things we tested.

Let’s start to understand step by step how to solve this issue.

Mainly we understood the problem appears after accepted to install the Windows Update, and after restarting the system the multiple monitors did not work anymore:

In the past few days, many users have reported the same issue. And if you have also faced the following problem with your NVIDIA graphics card. Then let me tell you. 

By the end of this article, you will be able to solve the issue. So, let’s dive into it and solve the issue.

Contents

What does “Windows has stopped this device because it has reported problems. (code 43) Nvidia”?

The Device Manager throws this error; this statement is primarily in general and may mean that there is an unresolved hardware problem affecting the smooth operation of your Windows pc. 

Your Windows wants you to fix it. And if you don’t, you will probably get Windows Error Code 43 Nvidia.

What is the reason behind Windows Stopped This Device (Code 43)?

It may happen if either the device hardware errors or the device driver fails. There are plenty of other reasons too that contribute to this error. Those could be overheating CPU, having Lucid Virtu MVP Application, improperly connected pin cable, corrupted drivers installed, outdated drivers, or Outdated Motherboard Bios. 

You do not need to worry about it. You can use one of the resolutions presented here that might help you find the solution and settle this issue.

Now the question is how to resolve this issue. Though troubleshooting this problem would be a bit stressful, if you have basic knowledge of computers, you can troubleshoot this problem with ease. Some of these solutions may do the work & you probably will not have to try them all.

You might need to work your route down until you find the resolution. You can use these approaches to find the solution to NVIDIA Code 43 (Windows Has Stopped This Device Because It Has Reported Problems)

Fix: NVIDIA Code 43 (Windows Has Stopped This Device Because It Has Reported Problems)

1. Resetting the power
2. Try updating all the drivers
3. Uninstalling the NVIDIA graphics driver
4. Disabling the graphics card & discharging the electrical build-up
5. Terminate excessive USB devices and reboot the pc
6. Link the device to a different computer
7. Use the System Restore function
8. Disable & Enable the device
9. Update the Windows on your computer
10. Try updating the BIOS firmware
11. Modify Power Management
12. Add more power to your device
13. Check the compatibility

1. Resetting the power:

To resolve the issue, you can try to execute a power reset, the most straightforward resolution, and it may work like a charm.

Resetting the power allows it to run the system requirements again and possibly fix any unfixed issues. Thus allowing your system to function properly. 

Following is what you ought to do:

1. Assure you have turned off your computer machine.
2. Unplug the charger or cable that operates your computer and remove the battery as applicable.
3. Pressing and holding the power button for at slightest one minute will help you discharge any electrical build-up.
4. Plug the charger back and put the battery back into its place.

Reboot your machine and check if windows have stopped this device because it has reported problems. (code 43) Nvidia error still occurs. It is good if the issue no longer exists. 

But if the issue still exists, move further to the other suggestions mentioned here if this did not help you with the error.

2. Try Updating All The Drivers:

 A flawed graphics driver may be what is causing the error, so you should try to update the driver to the latest version.

Neglecting the problem drivers can put you in big trouble. Updating the device drivers regularly helps your system to stay updated on any major or minor changes.

In case you do not have the time, patience, or enough computer skills to update the driver by yourself, some applications might come in handy to you that will help you to install the driver updates automatically.

These applications will automatically acknowledge your system and find suitable drivers.

The methods given below will help you:

1. Open the application.
2. Then, run a scan. If there are any problems with drivers, the application will detect them.
3. Select Update Driver after the NVIDIA graphics driver.
4. Also, you can click on the Update All button to automatically download and install the correct version of the missing or out-of-date drivers on your pc.

You can also do it manually. See here how:

1. Go to the Device Manager. You can search for it on the search bar.
2. Now, go to the Display Adapters.
3. Right-Click on the Nvidia drivers and select properties.
4. Next, go to the Driver tab and click on update driver.

3. Uninstalling the NVIDIA graphics driver:

Inadequate graphics drivers may be the reason for your problem if it shows a yellow mark after the device name in Device Manager. Try to uninstall the NVIDIA graphics card driver using the steps given below:

1. Hit the combination of Win+R (i.e., Windows key and R) to summon a run command.
2. Type devmgmt.msc, then hit the OK button to open the Device Manager Window on your pc.

1. Extend the Display Adapters category and right-click on the NVIDIA device. The context menu will pop up.
2. Click on Uninstall.

1. Close everything.

Now, you can download the latest Nvidia Driver from the Official Website by inputting the specific information regarding your system over here.

Restart your computer machine and see if windows have stopped this device because it has reported problems. (code 43) Nvidia problem still occurs.

4. Disabling the graphics card & discharging the electrical build-up:

Another method you could crack the problem is by disabling your graphics card and discharging the electrical build-up. Try to disable the NVIDIA graphics card driver using the steps given below:

1. Hit the combination of Win+R (i.e., Windows key and R) to summon a run command.
2. Type devmgmt.msc, then hit the OK button to open the Device Manager Window on your pc.

1. Extend the Display Adapters category and right-click on the NVIDIA device. The context menu will pop up.
2. Now, Click on Disable Driver.

1. And, Shut everything.
2. Restart your computer machine and notice if the problem still occurs.

If this also does not help you. Move to the next fix.

5. Terminate excessive USB devices and reboot the pc:

The first thing is to unclog the not-so-important UBS devices. Then reboot the computer. It will solve this problem. If not, try the other fixes. To reboot the pc, follow these measures:

1. Unclog the USB from the system.
2. Now, Turn the device off.
3. Wait nearly 10 minutes & then reboot the pc.
4. Plug the USB again into the system.

It should fix the issue if the issue isn’t severe. But still, if you are unable to fix this. Then consider trying the next few steps.

6. Link the device to a different computer:

Try to link the USB drive to a different computer. You can likewise use it with any other operating system. Congratulations if the pc is functioning precisely! 

For Erasing, windows have stopped this device because it has reported problems. (code 43) Nvidia on the USB. To do so, you need to remove the USB drive correctly. After that, you can attempt to reconnect the device to the prior computer, and Windows Error Code 43 is possible to vanish here.

7. Use the System Restore function:

Before performing this operation of System Restore, you should save your work and close all the programs because you will need to restart the pc for System Restore. Now, follow the below instructions to perform the system restore.

1. Click on Start.
2. Go to the Control Panel or Settings to find Recovery.

1. Go to the Recovery option.
2. Open System Restore.

1. Select Restore my computer to the previous time option.
2. Choose the date you have created in the Select restore point from the Calendar screen.

It will help you to solve the error Code 43. You can also check Microsoft’s Official Website for this.

8. Disable & Enable the device:

You can try disabling the device and then enabling it. It will allow the device driver to set up correctly with the system software. Maybe in your case, this will be able to fix windows that have stopped this device because it has reported problems. (code 43) Nvidia error for you. To enable and disable your device driver, you have to do the following:

1. Firstly, tap on the Windows Start Button Key.
2. Now, type Device Manager in the search box and select device manager.

1. Right-click on the device containing a problem with Code 43 errors and select disable the device.

1. Click, Yes to verify.
2. Now, select Enable device by clicking on the device.

9. Update the windows on your computer:

Many times users do everything to fix the issue. But they miss out on updating the system software. Nothing will work if you haven’t updated your system to the latest one. 

And to fix this error, I recommend you check if there are any pending updates. If there are any. Then just go and install them. To vacate the error, windows has stopped this device because it has reported problems. (code 43) Nvidia, update the windows. The steps enclose:

1. Go to Settings.
2. Open the Updates & Security option.
3. Click on Windows Update. Now, right beneath the Updates & Security in the left pane.
4. In the right pane, proceed to the Check for Updates button.

You can also go to the Microsoft Help Center or Check For Updates by searching Windows Updates over your search engine.

10. Try updating the BIOS:

This error could be occurring due to the outdated BIOS on your system. BIOS is the head instructor in the firmware that controls all the input and output operations on your system. You should learn about your system as you do not have to apply an update if it is the latest version. 

BIOS allows the computer to function and communicate one or another element to let the function of the computer work properly. For updating the BIOS on your computer. Follow the instructions below:

1. Firstly, Hit Win and R concurrently.
2. Type msinfo32 and press Enter.

1. Dig for BIOS version/entry with date mark.
2. Take note of this BIOS version information and close the window.

1. Next, search the BIOS information on your browser to download the BIOS update file.
2. You can compare both the BIOS versions to check if it is the newer version on not and download it.
3. Next, make sure your computer has a reliable power source.
4. Extract the BIOS files onto your computer.
5. Suppose you are getting any doubts regarding the installation. You can always read the Readme file provided with the BIOS.
6. Now, plug the flash drive into your computer and copy all the extracted BIOS files into it.
7. Power off your computer.
8. Now again. Power on your computer and hit the manufacturer-defined key to access the BIOS setup on your device.

If you do not know the key to access the BIOS setup, go to any search engine and search it for your particular device.

1. Locate the BIOS update option and select the flash drive from which you have extracted the file. 
2. Now. Select update and follow the instructions on the screen.

You can also go to the Microsoft BIOS Update Page and check the BIOS updates. Now see if updating the BIOS helped you fix the issue. Windows has stopped this device because it has reported problems. (code 43) Nvidia. If not. Move to the next step.

11. Modify Power Management:

The power-saving component might be liable for Windows Error Code 43 Nvidia if you utilize a laptop to bear out high-performance duties. Adjust power plan management as pursued:

1. Open the Device Manager again, and locate the USB root hub elements under Universal Serial Bus Controllers.

1. Double-click on the first USB root hub device functional there. After that, pick Properties from the options.

1. When a new window extends, open the Power Management tab, and terminate the checkmark option – Allow the computer to shut down this device to save power.

1. Click OK to complete the procedure, and repeat it for another USB root hub device.

12. Add more power to your device:

Lack of power supply can also cause this issue. Suppose you are facing this issue. Try buying a powered USB hub if the Code 43 error displays for a USB device. 

Some USB devices require more power than the USB ports present in your computer can supply. Plugging those devices into a powered USB hub will solve this challenge.

Try this and see if this fixes the Windows has stopped this device because it has reported problems. (code 43) Nvidia.

13. Check the compatibility:

Another possibility here for this, while not very probable, is that the device is incompatible with your arrangement of Windows. You can always review it to be sure. 

To check the compatibility on your computer. Follow the instructions below:

1. Select the search tab on your windows.
2. Next, enter CMDand hit enter.
3. Run CMD as administrator on your device.

1. Now enter schtasks.exe /Run /TN “\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser” in the terminal and hit enter.

1. This command will run a scan for 10-15 minutes. And will provide a list of results.

Suppose your windows could not complete the scan. Then probably, there is a compatibility issue. Ensure you put your device on safe mode before running the command to avoid access being denied or other issues.

To put your system in the Safe Boot, follow the instructions below:

1. Open the Run utility.
2. Now, in the input window. Enter MSConfig and hit enter.

1. Go to the Boot tab and select Safe boot.

Your system will ask you to Restart your system or Continue without restarting. Choose to restart your system. Once you’ll do, it will appear to you in a different window. 

Now, you can open the Command prompt, which will automatically open with the administrative privileges. So you don’t need to do it. And just run the command as we were doing earlier.

Conclusion:

That is it! We expect one of these solutions assists you in solving the NVIDIA Code 43 (Windows Has Stopped This Device Because It Has Reported Problems). If you are still troubled about fixing the issue. Reach out to a service center near you to fix this for you.

FAQs:

How Do I Fix NVIDIA Code 43 (Windows Has Stopped This Device Because It Has Reported Problems)?

If the device driver or hardware fails, Windows has stopped this device because it reported problems (Code 43) and errors that may arise. In most circumstances, reinstalling the driver can resolve the issue.

How Do You Revise NVIDIA Code 43 (Windows Has Stopped This Device Because It Has Reported Problems) On Bluetooth? Why did Windows stopped my graphics card code 43?

Why does code 43 happen?