Cách sửa lỗi detect and mount cd-rom năm 2024
Sometimes, especially with older drives, the installer may fail to boot from an optical disc. The installer may also — even after booting successfully from such disc — fail to recognize the disc or return errors while reading from it during the installation. Show Có nhiều nguyên nhân có thể khác nhau của những vấn đề này. Chúng tôi chỉ có thể liệt kê một số vấn đề thường và cung cấp lời đề nghị chung về cách quyết định chúng. Theo bạn sửa. Khuyên bạn trước tiên thử hai việc rất đơn giản.
If this does not work, then try the suggestions in the subsections below. Most, but not all, suggestions discussed there are valid for CD-ROM and DVD. If you cannot get the installation working from optical disc, try one of the other installation methods that are available. 5.4.1.1. Vấn đề thường gặp
5.4.1.2. Cách xem xét và có thể quyết định vấn đềIf the optical disc fails to boot, try the suggestions listed below.
If, after the installer has been booted successfully, the disc is not detected, sometimes simply trying again may solve the problem. If you have more than one optical drive, try changing the disc to the other drive. If that does not work or if the disc is recognized but there are errors when reading from it, try the suggestions listed below. Some basic knowledge of Linux is required for this. To execute any of the commands, you should first switch to the second virtual console (VT2) and activate the shell there.
5.4.3. Giải thích thông điệp khởi chạy hạt nhânTrong tiến trình khởi động, có lẽ bạn thấy nhiều thông điệp dạng $ dd if=/dev/cdrom | \head -c 2 , hay $ dd if=/dev/cdrom | \head -c 3, $ dd if=/dev/cdrom | \head -c 4 , ngay cả $ dd if=/dev/cdrom | \head -c 5 . Phần lớn thông điệp này vô hại. Bạn thấy chúng chỉ vì hạt nhân của hệ thống cài đặt được xây dựng để chạy trên các máy tính có nhiều thiết bị ngoại vi khác nhau. Không có máy tính riêng lẻ có tất cả các thiết bị ngoại vi, vì vậy hệ điều hành có thể hiển thị một số thông điệp lỗi trong khi tìm ngoại vi không có. Có lẽ bạn cũng xem hệ thống tạm ngừng một chút. Có xảy ra trong khi nó đợi thiết bị đáp ứng, nhưng thiết bị đó không nằm trên hệ thống của bạn. Nếu tiến trình khởi động hệ thống chạy quá lâu, bạn có thể tạo một hạt nhân riêng về sau (xem Phần 8.5, “Biên dịch hạt nhân mới”). 5.4.4. Thông báo vấn đề cài đặtIf you get through the initial boot phase but cannot complete the install, the menu option may be helpful. It lets you store system error logs and configuration information from the installer on a storage medium, or download them using a web browser. This information may provide clues as to what went wrong and how to fix it. If you are submitting a bug report, you may want to attach this information to the bug report. Thông điệp cài đặt thích hợp khác nằm trong thư mục head -c 6 trong khi cài đặt, rồi trong thư mục $ dd if=/dev/cdrom | \head -c 7 sau khi máy tính đã khởi động vào hệ thống mới được cài đặt. 5.4.5. Đệ trình báo cáo cài đặtIf you still have problems, please submit an installation report (in English please, whenever possible). We also encourage installation reports to be sent even if the installation is successful, so that we can get as much information as possible on the largest number of hardware configurations. Ghi chú rằng báo cáo cài đặt của bạn sẽ được xuất bản trong Hệ Thống Theo Dõi Lỗi Debian (BTS) và được chuyển tiếp cho hộp thư chung công cộng. Hãy đảm bảo bạn sử dụng một địa chỉ thư điện tử cũng công cộng. If you have a working Debian system, the easiest way to send an installation report is to install the $ dd if=/dev/cdrom | \head -c 8 and $ dd if=/dev/cdrom | \head -c 9 packages (apt install installation-report reportbug), configure $ dd if=/dev/cdrom | \head -c 9 as explained in , and run the command reportbug installation-reports. Alternatively you can use this template when filling out installation reports, and file the report as a bug report against the ata1.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.61, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.61 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 1 pseudo package, by sending it to ata1.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.61, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.61 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 2. Package: installation-reports
Boot method: In the bug report, describe what the problem is, including the last visible kernel messages in the event of a kernel hang. Describe the steps that you did which brought the system into the problem state. |