How can a clinician monitor the inspiratory effort of a mechanically ventilated patient?
Review Article Show
IntroductionIn the past decade, multiple important studies have underlined that maintaining patient breathing effort during mechanical ventilation is a double-edged sword (1-5). Positive effects of patient breathing effort may include improved recruitment of basal lung fields and facilitated oxygenation (5,6). Furthermore, preserving patient breathing effort might protect against development of diaphragm atrophy and contractile dysfunction resulting from disuse (2). On the other hand, patients with high respiratory drive can generate pressures that are incompatible with lung protective-ventilation, a phenomenon termed patient self-inflicted lung injury (P-SILI) (7). Additionally, studies in the early course of acute respiratory distress syndrome (ARDS) have demonstrated that continuous infusion of the neuromuscular blocker cisatracurium improves survival, possibly by abolishing breathing effort (4). Striking a balance between the beneficial and detrimental effects of breathing effort is one of the contemporary challenges in mechanical ventilation management (8). It has been proposed that ventilator assist should be titrated to the individual patient’s disease state, based on the respiratory drive, pressure output of the muscles and lung mechanics (5,8-10). However, it is difficult to assess activity of the respiratory muscle pump during mechanical ventilation without specific diagnostic techniques (11). The “gold standard” parameters are the work of breathing (WOB) and pressure-time product (PTP), which are based on pressure measurements (12). These measurements can be difficult to obtain and interpret. As such, the PTP and WOB are rarely used in clinical care and are mostly considered to be a research tool (13). Recently, diaphragm electromyography (9) and ultrasound (14) have become increasingly popular to assess breathing effort in research and clinical care. The aim of this review is to describe the physiological basis of breathing effort assessment. We will discuss how esophageal pressure (Pes), gastric pressure (Pga), PTP, WOB, ultrasound and electromyography can be used to quantify breathing effort during mechanical ventilation, and highlight the technical issues related to these measurements. Furthermore, we will discuss which levels of breathing effort may be considered desirable during mechanical ventilation at different stages of critical illness. PhysiologyDefinition of breathing effortAlthough the term breathing effort feels intuitive there is no clear definition, and many authors and textbooks define it differently. In this review we have defined breathing effort as any energy-consuming activity of the respiratory muscles aimed at driving respiration. Function of the respiratory muscle pumpThe respiratory muscle pump compromises multiple skeletal muscles that act in a coordinated fashion to maintain alveolar ventilation under different metabolic demands. Breathing effort is tightly controlled to match the respiratory demands of the body. An imbalance between breathing effort and the respiratory demands of the body will result in respiratory failure. Mechanical ventilation is life-saving in respiratory failure by taking over the patient’s WOB, restoring the balance between respiratory load and capacity. During partially supported ventilation, the WOB is shared by the patient and the ventilator. To assess the patient’s relative contribution to ventilation, it is useful to separate the inspiratory and expiratory muscle pump. See Figure 1 and Table 1 for a schematic representation of the respiratory system, muscle pressures and pressure gradients. Figure 1 Schematic representation of the respiratory system and relevant pressures. Note the single catheter equipped with an esophageal pressure balloon, gastric pressure balloon and an electrode array in between the two balloons. Orange lines represent the phrenic nerves. For calculations of the pressure gradients refer to the text. Pao, airway opening pressure; Paw, airway pressure; Pbs, pressure at body surface; Palv, alveolar pressure; Ppl, pleural pressure; Pes, esophageal pressure; Pga, gastric pressure. Table 1 Pressure gradients of the respiratory system Full tableInspiratory muscle pumpInspiration is mainly driven by the diaphragm in healthy individuals during tidal breathing (15). The diaphragm is a thin (±2.0 mm) dome-shaped muscle that forms the boundary between the thorax and the abdomen (16). The muscle fibers are conventionally divided into two main components: the crural portion inserts into the first three lumbar vertebrae, and the costal portion projects onto the rib cage and xiphoid process. The muscle fibers of the costal diaphragm that directly appose to the lower rib cage constitute the “zone of apposition” (16-18). In simplified form, the diaphragm acts like a piston in a barrel. Shortening of the muscle fibers in the zone of apposition descends the dome of the diaphragm, increasing the size of the thoracic cavity and compressing the abdominal cavity. Consequently, intrapleural pressure (Ppl) falls and abdominal pressure (Pab) rises, creating a pressure gradient called the transdiaphragmatic pressure (Pdi) (19,20). Pdi (cmH2O) = Pab (cmH2O) – Ppl (cmH2O) [1] The drop in pleural pressure will generate a pressure gradient over the lungs, the transpulmonary pressure (PL), which can be calculated by subtracting Ppl from the airway opening pressure (Pao): PL (cmH2O) = Pao (cmH2O) – Ppl (cmH2O) [2] The cyclic rises and falls in PL ultimately drive alveolar ventilation. Clinically, Ppl and Pab are often estimated by Pes and Pga. The assessment of Ppl and Pab requires placement of esophageal and/or gastric balloons (Figure 1), which may be perceived as too invasive for some patients. Today, balloon catheters are available that can be used for gastric feeding as well and thus assessing Pes and/or Pga is not more invasive than routine clinical care (13). It is important to note that the balloon catheters provide an estimation of pleural pressure, but the actual pressure in the pleural space differs from region to region due to gravity and differences in spatial respiratory mechanics (21). Nevertheless, Pes measurements provide a useful estimation of the mean pleural pressure at the dependent lung regions (21,22). The advantages, limitations and technical aspects of Pes and Pga measurements in critically ill patients have been discussed in two excellent review articles (23,24). Additional muscle groups are recruited when the respiratory load is elevated. The most important accessory inspiratory muscles are the sternomastoid, parasternal, scalene and rib cage muscles (25). Like the diaphragm, contraction of the accessory inspiratory muscles expands the thorax and lowers Ppl, promoting a rise in PL and subsequent lung inflation. Contraction of accessory inspiratory muscles does not generate a pressure gradient between the abdominal and thoracic compartment if the diaphragm is relaxed (12). At any time, Ppl depends on the pressure generated by all the respiratory muscles (Pmus) and the pressure gradient over the chest wall (Pcw): Ppl (cmH2O) = Pmus (cmH2O) + Pcw (cmH2O) [3] Accordingly, Pmus (cmH2O) = Ppl (cmH2O) – Pcw (cmH2O) [4] Pmus provides a global assessment of all inspiratory muscles, while Pdi is specific to the diaphragm (12,26). Pcw is often calculated by dividing the inspired volume by the theoretical compliance of the chest wall (Ccw), estimated as 4% of vital capacity. Accordingly, a (predicted) vital capacity of 4,000 mL will reveal an estimated Ccw of 160 mL/cmH2O (12). Reference values for Ccw are between 150 and 200 mL/cmH2O (12). However, these values were obtained in healthy subjects and might not be accurate in critical illness. The actual Ccw of a patient can be determined by constructing a pressure-volume curve for Pes during passive inflation; Pmus is zero during passive inflation and muscle paralysis, meaning the observed Pes is completely determined by Pcw {Eq. [3]} (26). Expiratory muscle pumpExpiration is a passive process during quiet breathing (19,26,27). When the inspiratory muscles relax, the elastic energy build up in the structures of the respiratory system drives lung deflation. The expiratory muscles are recruited to assist in expiration when the load posed on the inspiratory muscles is elevated (28). Additionally, the expiratory muscles are recruited when passive expiration is hampered by reduced elasticity of the lungs (e.g., emphysema) or elevated expiratory resistance [e.g., exacerbation of chronic obstructive pulmonary disease (COPD)] (29). The abdominal wall muscles are the principal muscles of expiration. The internal interosseous intercostal and the triangularis sterni muscles are accessory expiratory muscles (25). Contraction of the abdominal wall muscles compresses the abdominal compartment, increasing Pab. If the diaphragm is relaxed, the increased Pab will be transmitted to the thorax and increase Ppl, facilitating lung deflation. Contraction of the accessory expiratory muscles directly increases Ppl by compressing the thorax. Notably, the expiratory muscles can also facilitate inspiration. By contracting during the expiratory phase, lung volume is reduced below functional residual capacity and the diaphragm is shifted cephalad to a more optimal position (30,31). When the expiratory muscles relax during the subsequent inspiration, the diaphragm will descend and Ppl will fall, facilitating lung inflation (30). During high respiratory loads the expiratory muscles might generate more pressure than the diaphragm (32). Therefore, assessment of breathing effort at high loads should also take the expiratory muscles into account. Quantifying breathing effortPhysical examination and graphical inspection of ventilator waveformsPhysicians may rely on physical examination to assess breathing effort in clinical practice. For instance, recruitment of accessory muscles is a sign of increased respiratory workload (32). Inward movement of the abdomen during inspiration (abdominal paradox) means the accessory muscles exert more force than the diaphragm, which is often interpreted as a sign of impending diaphragm fatigue (33). Most patients develop a breathing pattern characterized by low tidal volumes and high respiratory frequency during prolonged fatiguing loads (34). However, these breathing patterns suggest an increased workload and impending fatigue, but do not allow quantitative assessment of breathing effort (35). The pressure and flow waveforms displayed on the ventilator are also inadequate in assessing breathing effort during partially supported ventilation, as they cannot distinguish between patient breathing effort and work of the ventilator (11). Pressure-based quantification of breathing effortBecause the respiratory muscles exert their function by generating pressure, breathing effort can be assessed by analysis of these pressures. The requirements and reference values of pressure-based assessment of breathing effort are summarized in Table 2. Table 2 Techniques for the assessment of breathing effort Full tablePressure amplitudesIf an esophageal and a gastric balloon are present, the amplitude of tidal swings in Pes, Pdi and Pga can be studied during partially supported ventilation by using the following calculation: ΔP (cmH2O) = P, expiration (cmH2O) − P, inspiration (cmH2O) [5] The formula can be used with Pes, Pga and Pdi to obtain their respective amplitude swings during inspiration and expiration. If the patient’s respiratory muscles are active, Pes will fall and Pga and Pdi will rise during inspiration (Figure 2A,B,C,D). A rise in Pga during expiration is a sign of expiratory muscle recruitment. Figure 2 Pressure-based assessment of breathing effort during the inspiratory phase. Dashed lines represent moments of zero flow. (A) Flow waveform; (B) gastric pressure (Pga) tracings; (C) transdiaphragmatic pressure (Pdi), calculated as Pga − Pes. Green hatched area is the pressure-time-product (PTP) of the diaphragm during inspiration. Notice the presence of Pdi before onset of inspiratory flow, a sign of intrinsic PEEP (PEEPi); (D) esophageal pressure (Pes) tracings. The compliance of the chest wall (Ccw), estimated at 4% of VC, has been superimposed on Pes at the onset of the fall in Pes and at onset of inspiratory flow generation (first vertical line), together with the dynamic lung compliance (CL,dyn). The colored area compromises the total PTP of respiratory muscle pressure (Pmus). The red area is the PTP attributed to PEEPi, the gray area represents elastic PTP and the blue area represents resistive PTP; (E) pressure-volume curve of Pes and lung volume. The Ccw and CL,dyn intersect at FRC. The red area represents WOB attributed to PEEPi, the gray area represents elastic WOB and the blue area represent resistive WOB. PEEP, positive end-expiratory pressure; FRC, functional residual capacity; VC, vital capacity. Pressure amplitude assessment is relatively straightforward and can be performed real-time at the bedside, making it especially useful to observe trends within a patient. However, there are several limitations to assessment of breathing effort based solely on Pes and Pga swings. Amplitude of pressure swings neglects the duration and frequency of contractions. Additionally, Pes swings are usually not corrected for the recoil pressure of the chest wall and intrinsic positive end-expiratory pressure (PEEPi), which can result in both under- and overestimation of Pmus. Consequently, pressure measurements show a rather poor correlation to energy expenditure (35). More in-depth analysis of breathing effort may be warranted in selected critically ill patients. PTPA more sophisticated parameter to quantify breathing effort is the PTP. The PTP is calculated as the time-integral of the Pmus (12): PTP = P (cmH2O) × t(s) = ∫ Pdt (cmH2O*s) [6] PTP is commonly reported over a 1-minute interval. The PTP of the respiratory muscle pressure (PTPmus) can be constructed if Pes measurements are available as an assessment of global respiratory muscle activity (Figure 2D). If Pga is also available, the PTP of the diaphragm pressure (PTPdi) can be constructed as a specific measurement of diaphragm effort (Figure 2C). Because the PTP is sensitive to the frequency and duration of contractions it correlates well with energy expenditure during a broad range of inspiratory loads (44). The PTP is insensitive to changes in volume, meaning that it is also valid when effort does not result in volume generation, such as during isometric contractions. This is especially relevant in ICU patients with PEEPi and poor interaction with the ventilator, that exhibit ineffective efforts (45). The PTP of the esophageal pressure (PTPes) can be divided into parts to overcome elastic, resistive and threshold (i.e., PEEPi) forces (Figure 2D). This subdivision may be of clinical interest in patients difficult to wean the ventilator, or to monitor effects of ventilator management and pharmacological interventions. The technical aspects of measuring the PTP have been covered recently (23,24). It is also possible to construct a PTP of the expiratory muscles (PTPex) (46), but this technique is seldom used and reference values are not available. More research is required before overall recommendations on PTPex can be made. There are limitations to the PTP. Volume and flow are not considered, even though contractions at higher flows and volumes are less efficient and thus require more effort. This has been demonstrated in studies where equal PTPs were generated at different flows and volumes. This resulted in widely different levels of the oxygen cost of breathing at equal PTPs (44,47). Furthermore, calculation of PTPmus requires measurement of Ccw, which is cumbersome in patient on partially supported ventilation as it requires passive inflation and muscle paralysis (12). Despite these limitations, the PTP is very useful as it is linearly related to activity and energy expenditure of the respiratory muscle pump during relatively constant ventilation. This was demonstrated in conditions of flow below 1 L/s (48) and duty cycles between 0.3 and 0.6 (44), which is applicable to most ICU patients (36). Tension-time index (TTI)Another method to assess breathing effort is the TTI, which relates the average inspiratory pressure (Pi,mean) to the maximal inspiratory pressure (Pi,max) that a patient can generate: TTI = (Pi,mean/Pi,max)*(Ti/Ttot) [7] In which Pi,mean can be either Pdi,mean or Pmus,mean, and Ti/Ttot is the relative duration of inspiration to a full breath cycle. For example, generating a Pdi,mean equal to 30% of Pi,max at a duty cycle of 0.5 would yield a diaphragmatic TTI (TTIdi) of 0.15. Some ventilators can calculate Pi,mean over a time period of a few breaths. Additionally, it is possible to obtain the Pi,mean by dividing the inspiratory PTP by the sampling period (12). The advantage of TTI over other indices is that the TTI partially corrects for reductions in muscle efficiency and weakness by relating the observed pressures to the maximal pressures. The TTI correlates well with oxygen consumption of the respiratory muscle pump (43,44). The TTI is also correlated with the time a certain load can be upheld by the diaphragm. In healthy individuals a TTIdi below 0.15–0.18 can be sustained indefinitely, while higher values will eventually lead to fatigue and task failure (43,49). There are some technical and theoretical limitations of the TTI. Technically, it is difficult to obtain reliable Pi,max-measurements in critically ill patients as it requires maximal voluntary effort which is hindered by sedation and motivation (12). Furthermore, the TTI does not take volume and flow into account. This was illustrated in two studies where the maximal sustainable TTIdi ranged from 0.11 to 0.22 and maximal sustainable TTI of the respiratory muscles (TTImusc) ranged from 0.16 to 0.32 within the same subject, depending on flow, volume and duty cycles (50,51). Despite these limitations, the TTI is a clinically useful parameter especially to assess whether a load posed on the patient’s respiratory muscle pump is sustainable. WOBThe classic method to assess breathing effort is the WOB. Work is done when a force moves its point of application over a distance. In case of the respiratory system work is done when a pressure changes the volume of the system (26). WOB = P (cmH2O) × V (L) = ∫ P dv (J) [8] WOB is often reported as work per liter (J/L), obtained by dividing the work per breathing cycle by the tidal volume. Increased work per liter means that more pressure is required to generate an equal volume. This can be caused by several factors, such as reduced lung compliance or the presence of PEEPi (52). Detailed analysis of the WOB is possible using the Campbell diagram to divide work into resistive, elastic and PEEPi components (Figure 2E) (23,26,52). Furthermore, WOB of the expiratory muscles can be assessed by attributing any observed Pes above the Ccw curve to expiratory muscle activity. Additionally, work per breathing cycle can be multiplied by the respiratory rate (in breaths per minute) to obtain the power of breathing or work rate (12). This is an interesting parameter from a physiological point of view, as it combines time and volume dimensions. Work rate correlates closely to oxygen consumption of the respiratory muscles in a wide range of flows, volumes and duty cycles (44,47). It has been proposed that the work rate, or mechanical power, is a unifying factor that might predict development of ventilator-induced lung injury (VILI) (53,54). There are limitations to WOB. First, as work is only performed when a volume is displaced, the WOB is insensitive to isometric contractions. Second, duration and frequency of contractions are also not considered. For example, the same breath might generate the same tidal volume at the same Pes, but could take twice as long. Work would not be different between these two breaths, even though the longer breath will consume substantially more energy. Other methods to quantify breathing effortOther techniques to quantify breathing effort that do not depend on direct assessment of pressure have been developed, including the electrical activity of the diaphragm (EAdi) and ultrasound. See Tables 3,4 for details, including reference values on these techniques. Table 3 Parameters, reference values, and comments of electromyographic assessment of breathing effort Full tableTable 4 Parameters, reference values and comments of ultrasound assessment of breathing effort Full tableRespiratory muscle electromyographyNeural control of breathing effort is tightly matched to the respiratory demands of the body. As such, both surface electrodes and electrodes placed on a nasogastric tube have been used to acquire electromyographic signals of the respiratory muscles in order to assess breathing effort in research and clinical care. Surface electrodes have been used to measure activity of the diaphragm, accessory respiratory muscles and expiratory muscles. Although non-invasive, the quality of the recordings can be heavily impaired by cross-talk of adjacent muscles and other factors such as fat, edema and movement artifacts (60,61). Furthermore, there are no standardized procedures for placement and analysis of the surface electrode signals and no reliable reference values are available. Therefore, further study is required before this technique can be used to quantify breathing effort in clinical care. The EAdi-signal circumvents some of the technical difficulties of surface electromyography. The EAdi-signal can be monitored real-time using a dedicated naso-gastric tube with wired electrodes positioned at the level of the crural diaphragm (Figure 1) (62). This catheter was originally designed to control the ventilator in a specific ventilation mode [neurally adjusted ventilatory assist (NAVA)], but recent reports indicate that EAdi-recordings are useful to monitor breathing effort and patient-ventilator interaction (63-65). Measurement of EAdi does generally not require additional invasive procedures as most ventilated ICU patients are instrumented with a feeding tube for regular care. The electrodes acquire the spatial and temporal summation of action potentials from the motor units in the crural diaphragm. There is a close correlation between electrical activity from the crural and costal parts of the diaphragm (66). Furthermore, the EAdi-signal is independent of changes in lung volume (67). EAdi correlates well to Pdi in healthy individuals and ICU patients (67). Thus, EAdi appears to be a reliable estimate of global diaphragm muscle activity in ICU patients (68-70). Electrical activity is not synonymous with muscle contraction and force generation. The coupling between electrical activity and pressure is expressed as the neuromuscular efficiency index (NME): NME (cmH2O/µV) = Pdi (cmH2O)/EAdi (µV) [9] The NME can be used to calculate pressure from EAdi when assuming constant coupling over time. NME obtained during expiratory holds and multiplied by the observed EAdi appeared to be a reliable estimation of Pmus under different conditions of ventilator assistance (9). Another index derived from the EAdi is the patient-ventilator breath contribution (PVBC). The PVBC estimates the patient’s relative contribution to tidal volume generation during NAVA by comparing EAdi peaks with tidal volume in assisted and non-assisted breaths (71). The PVBC reliably predicted the fraction of breathing effort generated by the patient in a small group of ARDS patients (72). Although promising, there are still limitations of EAdi-derived parameters to assess breathing effort. The EAdi-derived parameters are not necessarily a direct measure of breathing effort, but are more closely related to neural drive. EAdi is insensitive to recruitment of accessory muscles, making it less suited to assess breathing effort at high workloads. Furthermore, reference values for EAdi-derived parameters are not yet known. NME and PVBC indices need to be further evaluated in larger ICU populations before both indices can be widely implemented in daily clinical practice. UltrasoundUltrasound has gained in popularity as a diagnostic tool in clinical management and research in the ICU (14). The role of ultrasound to evaluate respiratory muscle function and effort have been discussed in recent articles (65,73). Components of the respiratory muscle pump, including the diaphragm, abdominal wall muscles and accessory muscles, are positioned relatively superficial and are readily accessible for ultrasound. Changes in the absolute thickness of the respiratory muscles over time within a patient can be used to recognize the development of atrophy (2,74,75). The thickening fraction of the diaphragm (TFdi) in the zone of apposition during inspiration can be used as a measure of contractile activity (76,77). This requires measurement of diaphragm thickness (Tdi) at end-expiration (Tdi,ee) and end-inspiration (Tdi,ei) (73): TFdi = (Tdi,ei − Tdi,ee)/Tdi,ee*100% [10] TFdi has shown fair correlation to the Pdi (78), PTPdi and PTPes (76,77) in some studies, but was not significantly correlated to Pdi in another study (55). Movement of the diaphragm dome during inspiration has also been used to evaluate diaphragm function and reference values are available (Table 4). To study diaphragm movement, the ultrasound probe is placed at the subcostal position, using the liver as a window on the right side and the spleen on the left side. In contrast to the TFdi, assessment of diaphragm movement should only be conducted in patients disconnected from the ventilator, as ventilator assistance will result in caudal movement of the diaphragm, even in a patient on neuromuscular blockers. As such, there is a poor correlation between diaphragm excursion and TFdi, PTPes and PTPdi during partially supported ventilation (77). Advantages of ultrasound include the non-invasive nature, low-costs, steep learning curve and straightforward calculations which allows bedside evaluation of breathing effort (73). However, several technical and methodological limitations apply to ultrasound assessment of breathing effort. Because the diaphragm is very thin, small errors in measurement can result in large overestimation and underestimation of thickness and thickening fraction (73). Additionally, the left hemidiaphragm is harder to visualize than the right side (78). Furthermore, TFdi is insensitive to duration and frequency of contractions and does not account for recruitment of accessory and expiratory muscles (59). Despite these limitations, ultrasound is a very promising technique in clinical care, especially as a bedside evaluation tool. Clinical implicationsAlthough assessment of breathing effort has been applied in physiological research and clinical studies for decades, the optimal range of breathing effort in critically ill patients remains to be established. Trials that compare different levels of effort have not been published so far. Therefore, we are dependent on physiological principles and reasoning to guide lung-protective and diaphragm-protective ventilation (79). Insufficient breathing effortStudies in the past decade have promoted the idea that insufficient breathing effort leads to atrophy and weakness of the diaphragm, a process termed ventilator-induced diaphragm dysfunction (VIDD) (80,81). For instance, significant diaphragm atrophy has been observed after complete inactivity of the diaphragm for 18 to 69 hours in brain-dead organ donors (1). Subsequent studies demonstrated that diaphragm atrophy also occurs during partially supported ventilation (82-85), and that the extent of atrophy is related to the level of assistance provided by the ventilator (2). Recently, development of diaphragm atrophy has been associated with prolonged ICU admission and an increased risk of complications (86), further supporting the idea of ventilator over-assistance and VIDD. Additional factors can play a role in the development of muscle weakness and atrophy in ICU patients including inflammation (87), myotoxic drugs (88), nutritional deficiency and catabolic state (89). The term critical illness-associated diaphragm weakness (CIADW) is now preferred over VIDD to describe respiratory muscle weakness in critically ill patients (90). Remarkably, clinical studies have shown that neuromuscular blockers administered in the first 48 hours of moderate to severe ARDS improves outcome without the development of clinically relevant muscle weakness (4,91-93). Recently, it was observed that patients on assist-control ventilation regularly exhibited contractions of the diaphragm, a type of asynchrony called reversed triggering (94). This mechanism prevents complete inactivity of the diaphragm, and possibly hampers the development of disuse atrophy during controlled ventilation. Indeed, short daily sessions of low-frequency pacing prevents development of disuse atrophy in peripheral skeletal muscles of ICU patients (95,96). In a case study on a single patient receiving controlled ventilation for eight months, pacing one hemidiaphragm 30 minutes a day prevented the development of disuse atrophy (97). Although further study is warranted, it is possible that levels below resting breathing effort can prevent development of disuse atrophy (40). Excessive breathing effortPrevention of excessive breathing effort by unloading the respiratory muscles is a cornerstone of mechanical ventilation. Excessive effort can be detrimental to lung mechanics and the function of the respiratory muscle pump. Detrimental effects on the lungsVigorous efforts can generate substantial negative pleural pressures (98), potentially leading to injurious PL in ventilated patients (7,99-101). As such, it is advised to keep the peak PL below 25 cmH2O and tidal amplitude swings below 12 cmH2O based on the physiological principles of stress and strain (23,102). Furthermore, vigorous patient effort could result in poor synchrony with the ventilator and impairs oxygenation and comfort (103), warranting sedation and paralysis (91). Reduced Ppl can cause intrapulmonary air shifts from non-dependent to dependent regions (pendelluft), potentially leading to injurious alveolar over-distention and rupture (3). Additionally, the reduced Ppl brought on by vigorous patient effort increases the vascular transmural pressure and can lead to elevated lung perfusion and development of alveolar edema (22,23). Increased activity of the expiratory muscles could result in elevated Ppl during expiration. If the Ppl is higher than alveolar pressure (Palv) the alveoli have a tendency to collapse, promoting atelectasis and possibly cyclic recruitment of alveoli (atelectrauma) (99,104). It is possible that the beneficial effects of muscle relaxants during the early course of ARDS can be attributed to the prevention of excessive muscle effort (4,92,93), although effort was not measured in these studies. Detrimental effects on respiratory musclesExcessive breathing effort could incite eccentric contractions of antagonizing muscle groups, for example concomitant activation of the diaphragm and abdominal muscles. Eccentric contractions were found to cause sarcolemmal disruption and inflammation on a microscopic level in animal models (105,106). Furthermore, sarcolemmal disruption has been observed in animal models of mechanical ventilation after high breathing effort (107-109) and in patients with COPD (110). Infiltration of inflammatory cells has been observed in diaphragm fibers obtained from ventilated ICU patients (83). Additionally, patients exhibiting high efforts as assessed by diaphragm ultrasound showed increased Tdi over time, which could be a sign of muscle inflammation and/or injury (2). However, both studies were observational, so whether vigorous breathing effort leads to sarcolemmal damage in critically ill patients, and at which levels of effort this occurs, warrants further study. Appropriate effort during different stages of illnessBased on the aforementioned considerations we recommend monitoring of breathing effort in selected mechanically ventilated patients (65,111). During the very early course of critical illness respiratory drive can be excessive, leading to injurious respiratory muscle contractions and damaging PL, especially in ARDS (98). In this early phase, high effort occurs in a “muscle hostile environment” characterized by systemic and local inflammation. It is reasonable to prioritize unloading of the respiratory muscles to prevent the lung injury and diaphragm dysfunction under these conditions (7,79). Employing a partially supported mode to regain patient breathing activity is advisable after the initial phase of critical illness, although strenuous efforts should still be prevented (79,101). This strategy has the potential to allow simultaneous lung-protective and diaphragm-protective ventilation. ConclusionsBoth ventilator over-assistance and under-assistance may have adverse effects on respiratory muscle function. As outlined in this review the desired level of respiratory muscle effort depends on patient characteristics, in particular the phase of critical illness and mechanical output of the respiratory muscles. Quantification of breathing effort requires specific monitoring techniques and calculations. This is a developing field, and new studies will help us to better define optimal levels of respiratory muscle activity in ICU patients. The fact that we do not have clinical studies to demonstrate that monitoring of respiratory muscle function improves outcome should not be used as a reason to withhold such techniques in selected patients. Future clinical trials will provide data if guiding ventilator management on breathing effort improves outcome of critically ill patients. AcknowledgementsH de Vries is supported by a research grant of Amsterdam Cardiovascular Sciences. Conflicts of Interest: L Heunks has received research support from Liberate Medical (USA) and Orion Pharma (Finland), and speakers fee from Getinge (Sweden). The other authors have no conflicts of interest to declare. References
Cite this article as: de Vries H, Jonkman A, Shi ZH, Spoelstra-de Man A, Heunks L. Assessing breathing effort in mechanical ventilation: physiology and clinical implications. Ann Transl Med 2018;6(19):387. doi: 10.21037/atm.2018.05.53 How do you monitor mechanical ventilation?Pulse oximetry and capnography are used to ensure that appropriate oxygenation and ventilation are achieved and maintained. Assessments of driving pressure, transpulmonary pressure, and the pressure-volume loop are performed to ensure that adequate PEEP is applied and excess distending pressure is minimized.
How can you tell if your ventilation efforts are successful?SIGNS OF ADEQUATE VENTILATION: In most patients, your assessment of ventilation will be based on observing their respiratory rate (normal 12 to 20) and listening for clear breathing sounds in the left and right chest. Auditory confirmation of breathing sounds is the strongest sign of adequate ventilation.
How do you assess effort of breathing?The most common and traditional way to assess a patient's breathing effort is through physical examination. Tachypnea, accessory muscle use, nasal flaring, tracheal tug, and diaphoresis are the primary signs present in individuals with inefficient respiratory effort.
What assessments must you perform on a ventilated patient?When you enter the patient's room, take vital signs, check oxygen saturation, listen to breath sounds, and note changes from previous findings. Also assess the patient's pain and anxiety levels.
|